DIY Installation: How to Install a Hose Reel in Your Garden
Installing a hose reel in your garden may seem daunting, but with this guide, you’ll be on your way to a quick and easy installation in no time. With a Hose Reel, watering your plants becomes easier, more efficient and more enjoyable. A well-installed hose reel helps keep your garden tidy, prevent your hose from kinking or tangling, and extends the life of your hose. Whether you’re a seasoned DIY enthusiast or a novice gardener, installing a hose reel is a straightforward project that can be completed in a few simple steps. In this guide, we’ll show you the DIY Installation: How to Install a Hose Reel in Your Garden process.
Step 1: Choose the Right Size Hose Reel
Before starting the installation process, it’s important to buy the right sized hose reel for your garden. You wouldn’t want a bulky 65 ft hose reel when your garden only needs 30 ft of length.
Step 2: Gather Your Tools and Materials
Once you’ve selected the appropriate hose reel, gather the necessary tools and materials. You will typically need:
- The Hose Reel
- A drill with appropriate drill bits
- A leveler
- A pencil or marker
- A wrench
Ensure you have all the components and hardware included in your hose reel kit before you begin.
Step 3: Choose the Installation Location
Select a suitable location for your hose reel. If you’re installing a wall-mounted hose reel, choose a spot near your water source for convenience. Ensure the surface is smooth, sturdy and can support the weight of the hose reel and the hose. Many customers opt to install the hose reel onto a post they cement into the ground instead of drilling into the siding of their house.
Step 4: Mark the Mounting Points
Line up the mount to the desired mount location making sure the mount is leveled using a leveler. After, use a marker to put a point at each of the screw holes. Make sure all the holes are lined up before drilling into the wall or post.
Step 5: Drill Holes and Insert Wall Plugs
Using a drill and appropriate drill bit, make holes at the marked locations. The size of the drill bit should match the size of the holes on the mount. Insert the wall plugs into the drilled holes, tapping them gently with a hammer if necessary to ensure they are flush with the wall.
Step 6: Attach the Hose Reel
Align the hose reel bracket with the drilled holes and secure it to the wall using the provided screws. Use a wrench or pliers to tighten the screws, ensuring the bracket is firmly attached and level. With our hose reel, you can attach the unit with the back together onto the post/wall rather than that being a separate task.
Step 7: Connect the Hose
Attach your garden hose to the hose reel’s water inlet. Use a wrench or pliers to tighten the connection, ensuring it is secure and leak-free. If your hose reel has a leader hose (a short hose connecting the reel to the water source), attach this to the water spigot and then connect it to the hose reel.
Step 8: Test the Hose Reel
Turn on the water supply and test the hose reel to ensure it functions correctly. Check for any leaks at the connections and make any necessary adjustments. Pull the hose out and reel it back in to ensure smooth operation. For retractable models, test the automatic rewind feature to make sure it works properly.
Step 9: Maintain Your Hose Reel
Proper maintenance is key to prolonging the life of your hose reel. Regularly check the connections for leaks and tighten as needed. Clean the hose reel periodically to remove dirt and debris. Furthermore, with our models, you don’t need to worry about the hose getting stuck or tangled since it retracts with a guard moving the hose from side to side.
Installing a hose reel in your garden is a practical project that enhances your gardening experience. By following these steps, you can enjoy a neat, organized garden and ensure your hose is always ready for use. Whether you opt for a wall-mounted, portable, or retractable hose reel, proper installation and maintenance will provide you with years of efficient and hassle-free watering.
